double row 10 pin pogo pin connector KLS1-10PGC01B

Please download PDF information:

Product Detail

Product Tags

Product Images

Product Information

double row 10 pin pogo pin connector

Housing: PPA, PA46, PA9T, LCP

Pogo Pin OEM

Plastic Size(mm)	Pogo Pin Size(mm)
L	W	H	Pitch	Cap	Positioner	A	B	C	D	E	F	Number of Pin

PACK:
Bulk: aluminum foil bag.

Reel: diameter Φ330mm; carrier tape width: 12, 16, 24, 32, 44mm.

=================================================================================

product testing introduction

Electrical performance
1	Contact impedance	30 mohm Max at working stroke	Top-Link factory testing standard*
2	Insulation Resistance	500 Mohm Min	EIA-364-21
3	Dielectric Withstanding Voltage	No flash-over,air discharge,breakdown or leakage	EIA-364-20
4	Temperature Rise vs Current Rating	30 °C Max. temperature rise at specified current	EIA-364-70
Mechanical performance
1	Spring force	refer to product drawing	EIA-364-04
2	Retention Force	0.5Kgf(4.5N)Min.	EIA-364-29
3	Durability	10,000 cycles Min. No physical damage Resistance after test 30 mohm Max.	EIA-364-09
4	Vibration	No physical damage,No electrical discontinuity more than 1i second.	EIA-364-28
5	Mechanical Shock	No physical damage,No electrical discontinuity more than 1i second.	EIA-364-27 method A
Environmental
1	Solderability	solder coverage area Min.95%	EIA-364-52
2	Salt Spray Corrosion	No physical damage. Resistance after test 100 mohm Max.	EIA-364-26 condition B
3	Resistance to Solder heat(IR/convection)	No cracks,chips,melting,orblister	EIA-364-56
4	Humidity	No physical damage, Resistance after test 100 mohm Max.	EIA-364-31,method ii,condition A
5	Thermal Shock	No physical damage, Resistance after test 100 mohm Max.	EIA-364-32,method ii
6	Temperature Life	No physical damage, Resistance after test 100 mohm Max.	EIA-364-17,condition A,condition 4
Environmental
1	peel force	10-130 gf	EIA-481
2	Drop Test		Refer to drop test Standard of Molex

Remark: Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
———————————————————————————————————————————————————–
KLS is equipped with comprehensive inspection and reliability testing equipment.
KLS attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
KLS has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
==========================================================================================
pogo pin connector OEM type
1, small diameter, fine type products

The minimum can be done is below 0.75

2, high durability

Maximum durability of up to 1 million times

3, large current

Maximum up to 15A current

4, high reliability

100% dynamic impedance testing to ensure 100% functional zero defects

5, lower operating height

Minimum working height of up to 1.5mm, the chopping block can be lower

6, high precision (size & forward force)

Height tolerances up to +, – 0.05mm positive up to + / – 10%

7, non-standard structure

Customer requirements can be customized according to customer requirements, such as: mushroom head structure

Previous: 1.27×1.27mm Pitch Box Header Connector Height 4.9mm KLS1-202C

Next: double row 8 pin pogo pin connector KLS1-8PGC01B